operating_systems

This magazine is from a federated server and may be incomplete. Browse more on the original instance.

DEADBEEF, in Going to try Debian 12 when it releases is there anything i should know about Debian in general beforehand?
@DEADBEEF@beehaw.org avatar

Debian-specific advice

Debian is a stable distro, so software versions will remain pretty much the same over the life cycle. This is good if stability (software not changing out from under you) is desired, but if you want to take advantage of new features as they are added to whatever software you’re running, it’s less beneficial. So, if you’re going to run debian as a desktop os, I would recommend switching your apt sources to point to the unstable branch: sid switching your apt sources to point to testing (see below).

You’ll probably see a lot of older tutorials and stackoverflow posts that use apt-get, which predates apt, instead of apt as the package manager. apt is the recommended frontend; apt-get will work, but apt will have a nicer user experience.

Also, on the topic of apt, there are three ways to run updates that you’ll probably see online; this stackexchange post provides a pretty good explanation of the differences between them.

General linux advice that I think is worth sharing

Man pages are pretty helpful once you know how to navigate them. Some tips regarding that:

  • You mentioned that you tried manjaro, so I think you probably already know what man is, but just in case: man is the command that you use to pull up manual pages for basically everything.
  • You can search through the man database for a keyword with the apropos or man -k commands. For example, apropos video pulls up a list of all the man pages that have the word video in their names or descriptions.
  • You might notice when running the above command that there are numbers in parentheses after the manual names. This is because the manuals are broken out into 9 sections based on the types of pages they contain. You can put the section number before the name to specify which section to pull up the manual from. So, if you had two manuals named foo in sections 1 and 3, to pull up the one for section 3 you would use the command: man 3 foo. If you want to read more, man has it’s own manual page, which you can pull up with man man.
  • You can search for text in man with / and ?. / performs a forward search and ? performs a backwards search. You can jump forward to the next result in the search with n or back to the previous result with p.
  • The bottom of man pages will have a ‘see also’ section, which lists related commands. Some man pages will also have an examples section.

Another good place to look for documentation is the arch wiki. A lot of the information on there translates to other distros fairly well, and it’s got huge amounts of well written information. If you use duckduckgo, the bang for it is !aw.

The shell is pretty intimidating for a lot of new users. While it’s not strictly necessary for most things, I do think that you’ll have a smoother linux experience if you become at least a little bit comfortable using it. Here is a bash guide aimed at beginners.

Finishing Thoughts

Looking back at what I’ve written, I realize that I have dumped a lot of information on you. So I think the best piece of advice that I can offer is this: Becoming comfortable with linux (or any new operating system) takes time and can feel overwhelming. Don’t feel pressured to understand everything immediately and don’t be afraid to go slow; Rome wasn’t built in a day.

I’ve been running linux as a daily driver for 6 or 7 years now, and I run debian on my servers, so if you have any questions now or in the future, I am happy to try to answer them.

Hirom,

I would recommend switching your apt sources to point to the unstable branch: sid.

Strongly disagree with this. Most users should use Debian stable, or if you needs new versions of specific software, then maybe testing or backports.

Unstable is intented for Debian maintainers, and people who do QC and debug Debian. Unstable means more frequent bugs and breakages, which only makes sense if you’re working on detecting bugs and fixing them before new packages arrive in testing/stable.

Using unstable without being an advanced Debian users is asking for trouble, because you risk more frequent breakages that requires manual intervention and in-depth Debian/Linux knowledge to fix thing. Veteran Linux users may be comfortable with this, but it’s the wrong choice for most new users.

DEADBEEF,
@DEADBEEF@beehaw.org avatar

Good point. Testing would probably be a better choice; I’ll edit the parent comment to reflect that

Hirom,

Thanks

tango_octogono, in What's the best Linux alternative to Windows for gaming
@tango_octogono@beehaw.org avatar

It kind of doesn’t matter which distro you use. They should all work similarly with gaming, there’s no distro with some magic formula that makes it more compatible or with better performance than the alternatives. So pick one that strikes your fancy.

If you’re new, it’s probably better to stick with well known distros. I recommend Mint and Pop OS. Both are based on Ubuntu, so every time you run into an issue or have a questions, you can google solutions for Ubuntu which will also work on Mint/Pop OS. But both also have big communities, so you’ll always have help.

Word of advice that Nvidia and Linux don’t really work that well together. Some games will have issues. AMD GPUs work just fine though.

Lx32, in What's the best Linux alternative to Windows for gaming
@Lx32@feddit.it avatar

ATM I use PopOS on my rtx3050m laptop. Once you understand how to setup all the command for using the discrete graphics it runs flawless.

skookumasfrig,

I use PopOS too. With Lutris, most games run out of the box.

Lx32,
@Lx32@feddit.it avatar

The problem are only native linux games runned trought Steam. In hybrid mode they will not use the discrete graphic card. For the rest I have no problem

skookumasfrig,

I run my entire steam library that way. You need to enable steam play for all games.

Lx32,
@Lx32@feddit.it avatar

I know. I try to explain better. My laptop has the intel integrated graphics and the nvidia dedicated. From PopOs I usw the hybrid mode, zo both the card are running. From lutris and heroic I have no problem. I switch the toggle andthe game will run with the nvidia card. From steam all the games that will use proton use the nvidia card as default. While all native linux games not, they will use the intel ones if not specified.

followthewhiterabbit, in What's the best Linux alternative to Windows for gaming

Isn’t this Pop-OS’s thing? Being literally for the gamers on Linux?

wet_lettuce,

I dont know that its how they brand themselves, but Pop!_OS is a fantastic linux gaming distro.

Its based on Ubuntu, but they do several very important things: they update/patch the kernel with the latest drivers and goodness and provide the latest nvidia proprietary drivers. So you get the stability and durability of ubuntu + newer kernel support which means things like much more current mesa drivers (for radeon cards).

I’ve been using it full-time for 3 (or 4?) years now. I technically have my PC dual booting with Windows for gaming reasons, but since the steamdeck took off all of the big games I want to play are available on linux. I’ve logged into windows exactly 2 times and that was to run updates.

Pop has been rock solid and turned out to be a great gaming OS.

Hirom, in Following the usual playbook, IBM's Red Hat begins locking down access to it's "open source"

Opensource licenses typically doesn’t require the software to be free, just that the source and modification be made available to users.

Making user pay to access both binaries and source is fair, as long as RedHat keep contributing code to upstream projects.

hopolapopola, in Following the usual playbook, IBM's Red Hat begins locking down access to it's "open source"
@hopolapopola@beehaw.org avatar

well that’s a bit of a dick move

SemioticStandard, in Following the usual playbook, IBM's Red Hat begins locking down access to it's "open source"
@SemioticStandard@beehaw.org avatar

What is it lately with companies and shooting themselves in the foot? Have all the CEOs gotten together and mutually decided that this was the year they were going to piss off their communities?

Red Hat are burning through a lot of the good will they’ve made over the years with this.

Here’s the statement the Rocky Linux folks put out:

rockylinux.org/news/2023-06-22-press-release/

Good luck, brothers. I wish you well.

simonced, in Linux gamers, what distro are you currently on?

In my case, I use Fedora exclusively (no dual boot).

I tried PopOS, but I had problems with each update.

nlm,
@nlm@beehaw.org avatar

Any particular reason for Fedora or is that just what you are comfortable with?

simonced,

No real reason I think.

I had problems with PopOS, but I could have gone Mint since it’s the one I knew the most.

But since I was reinstalling, I gave Fedora a try, and I liked it so I kept it.

nlm,
@nlm@beehaw.org avatar

Feels like that’s pretty common these days. Most of the big distros are polished enough to get the work done without jumping through too many hoops really.

regulatorg, in Linux gamers, what distro are you currently on?

PopOS is best for out the box gaming, its similar to Ubuntu so you'll be familiar with it

nlm,
@nlm@beehaw.org avatar

What’s their biggest advantages against Ubuntu?

averyfalken,

Truthfully it comes with nvidoa drivers pre installed.

Personally I run mint and its just a couple of clicks to get it installed in mint. I tried pop is didn’t like it that much and gave me less stability with some of my use cases

nlm,
@nlm@beehaw.org avatar

Yeah, that’s basically what I figured. Plus some bells and whistles in the design department. Might just as well go with *buntu and install drivers then.

averyfalken,

Don’t know how different it is with buntu I know mint does extra things. I’d you like the cinnamon desktop mints the best bet

noodlejetski, in Linux gamers, what distro are you currently on?

EndeavourOS with Plasma. migrated from Manjaro after one too many questionable decision on their side.

nlm,
@nlm@beehaw.org avatar

What bugged you about Manjaro?

noodlejetski,

basically every thing on https://manjarno.snorlax.sh/, one by one. I just reached the point when I decided to hop to another distro at the next reformat.

nlm,
@nlm@beehaw.org avatar

Sure, there are some bad mistakes in there but that site feels like a personal vendetta though.

winged_fluffy, in Linux gamers, what distro are you currently on?
@winged_fluffy@kbin.social avatar

I'm currently on Pop! OS 22.04 LTS. For me it worked out of the box. That installer with the NVidia drivers already included was a dream, so I didn't have to set up anything special. I did end up preferring the KDE desktop over Gnome, so I just went screw it and installed KDE plasma on top of it. It's been my daily driver like this for years.

Though, honesty requires me to mention that over the 4-ish years I've been using it they pushed a kernel update twice which killed the nvidia drivers, causing you to be unable to boot to the desktop. Solution was as simple as just rebooting into the previous kernel for a while and waiting for an update which fixes it, but still...

Other than that, pretty happy with it and I'm unlikely to change anytime soon.

ezri,
@ezri@beehaw.org avatar

I tried PopOS but had several issues immediately, including the display flickering despite updating my Nvidia driver. Other than that it just felt like a somewhat worse Ubuntu to me, so I quickly went back to Ubuntu

nlm,
@nlm@beehaw.org avatar

One thing that bugged me last time I wanted to try out Pop was that my Efi partition was considered too small. It was 500mb, you’d think that’d be enough?

Sharmat, in Linux gamers, what distro are you currently on?

Currently running Fedora on my laptop and Arch on my desktop, though I’ll probably migrate from Fedora to openSUSE next month.

nlm,
@nlm@beehaw.org avatar

Oh, an openSUSE fan! There’s dozens of us! :)

I do really enjoy Tumbleweed with Plasma to be honest. It just feels so polished.

ANuStart,

While I like Tumbleweed and Plasma, I can't for the life of me figure out why KDEWallet keeps asking for my password to get on wifi every time I reboot.

Sharmat,

Yeah, that happens sometimes for me too. I usually just disable it in the settings, but irrc, if you set the kwallet password and the user password to be the same, it shouldn’t ask for it.

nlm,
@nlm@beehaw.org avatar

Yeah I remember it happening for me at some point as well and I think this fixed it. It was quite some time ago though so I’m not sure at all. :P

lertsenem, in Linux gamers, what distro are you currently on?
@lertsenem@mastodon.lertsenem.com avatar

I weirdly did not see anyone mentioning SteamOS? Formerly based on Ubuntu, now based on Arch, I believe.

It's the distribution that the #SteamDeck is packaged with, and so it's become my main gaming distrib now. :]

nlm,
@nlm@beehaw.org avatar

Are they providing the arch based version for download now? I was under the impression they’ve only set it up for steam decks but not for general use?

EmpiricalFlock,
@EmpiricalFlock@beehaw.org avatar

According to the website the public release is based off of Debian still.

nlm,
@nlm@beehaw.org avatar

Yeah, thought so. Hope they’ll publish their newer versions as well soon.

lertsenem,
@lertsenem@mastodon.lertsenem.com avatar

@nlm You're right, but there is an unofficial version (with some tweaks to work on standards PC) available here.

It works as intended, but I would only recommend it if you intend to use your PC in a console-like setup (ie, plugged to a big screen, with a game controller).

nlm,
@nlm@beehaw.org avatar

Ah cool!

Not something I’d use now then but still neat that you can get it :)

jakepi,

I tried HoloISO and had pretty mixed results. I’ve had much better luck with ChimeraOS.

The devs on ChimeraOS are excellent too, they take in community feedback and are very helpful.

sailsperson, in Linux gamers, what distro are you currently on?
@sailsperson@kbin.social avatar

Here's my config (no hardware):

  • OS: Arch
  • Kernel: linux-zen
  • Window Manager: i3-gaps
  • Compositor: picom

I've been running this for several years now across multiple PCs, all with different hardware, including Nvidia and AMD for graphics, and Intel and AMD for CPU - and it's been working really well for me right up until recently.

After this paragraph, I will talk about the issues I've exeprienced as a gamer using my particular config. Please note that it's just a couple of minor issues, and the rest of the experience has been more than wonderful, convenient, functional, and beloved, and I do recommed Arch as a gaming setup as someone who's been running it to play games for several years in a row.

The most recent Steam Next Fest (June 2023) has revealed several demos that behaved like they launched, i.e. Steam changed my status to "in-game", changed the Start button in library, updated the playtime properly, etc., yet the game did not, in fact launch at all. I managed to play the affected demos when I switched to the KDE Plasma desktop environment on the same PC... and back on the same config after that as well.

I would consider that a one-time error that was gone by, essentially, reloading the X server, but there's been another consistent issue that I have only managed to observe in this i3+picom config. Ever since Steam's most recent UI beta, the floating elements, such as the buttons that let you install the game's demo, wishlist it, or navigate the store by the tags applied to the same game, all of which appear when you're hovering your mouse pointer over the game's thumbnail in Steam, are basically ignored; when clicking any of them, the click registers on the element that is supposed to be underneath the element you're actually trying to click: for example, if you're hovering your mouse pointer over a game and want to click the green wide "Install Demo" button, which is floating over another game's thumbnail, you'll click that thumbnail instead and open its Steam page. This particular issue persists between full PC reboots, X server restarts, i3/picom restarts, etc., and never occured in XFCE or KDE Plasma.

As I haven't been using any of the store features in Steam prior to the June's Steam Next Fest, I failed to notice any of the above, but now, I can't deny that it's been annoying. I really like my current configuration for everything I'm doing at my PCs: it's great for my work, it's even great for my gaming, it's great for my leasure, and I don't want to ditch it, because I have already tried many other tiling window managers, and i3-gaps is the one that stuck with me the most.

Now, I know there's sway, which is supposed to be a drop-in alternative, i.e. I can use my i3 config with it no problem, but sway uses the Wayland compositor, so I can't run it as easily: I'll have to set up the SDDM display manager instead of the dead-simple lightdm in order to keep the convenient multi-user setup I have, and probably sacrifice some of the performance my GTX 1080 has been giving with the proprietary drivers (I know, disgusting, but it has worked the best for my hardware as compared to the nouveau, unfortunately). I guess it's just time for me to tinker again.

nlm,
@nlm@beehaw.org avatar

You know… at least for me, I think I’m past the stage of being horrified over having to use proprietary drivers. I know it’s not as nice as a pure open source system, but still… it gets my system to run better, it’s free and it’s still Linux. So in my opinion it’s a good tradeoff still.

I do get why purists would hate it though and I wish you’d get the same performance with a completely free system.

sailsperson,
@sailsperson@kbin.social avatar

As far as I know, it's not entirely about some purism ideal they have in mind - the difference between the two nvidia camps on Linux is the functionality you gain with both drivers, and the proprietary driver is simply more restrictive, so, yeah, I agree that they have a point.

This is the reason I know very well that my next GPU is going to be an AMD one (given that their hardware has proper open source source by that time, that is). I bought by GPU back in 2017 or 2018, I think, a couple of years before using Linux and even considering it - had I known that today's me was going to run LInux, I would've gone for an AMD GPU right away.

Even skipping the Nvidia driver debates, the AMD hardware has been a much more consistent and pleasant experience for me on Linux overall across several AMD-based laptops that I have installed Linux on. While I did manage to get things going on my desktop that has an Nvidia GPU, it definitely caused me more headache than I expected.

nlm,
@nlm@beehaw.org avatar

Good points all around. I suppose AMD would be a better choice when the time comes to upgrade. There’s no real down sides to them either compared to Nvidia except maybe not supporting the same ray traving tech?

I’m a bit out of the loop there though.

hobbsc, in Linux gamers, what distro are you currently on?

Mint Cinnamon. Things generally work put of the box. There’s the occasional weird config mess to get into but it’s Linux.

BananaTrifleViolin,

Yeah I use Cinnamon too. It's fairly polished and can delve into Ubuntu or Debian when missing something you really want. I find the Nvidia drivers are easy to set up and maintain, and Steam works reasonably well (I have had a few quirks but nothing that I couldn't resolve).

Bucket_of_Truth,

The standalone Nvidia driver install panel makes installing the right gpu drivers a breeze.

The only problem I ran into is that it won't boot with my main monitor (1440p 165hz) plugged in. I have to use my secondary monitor (4k 60hz) to install the OS and Nvidia drivers first, then shutdown and plug in the main monitor and everything works on the next boot.

  • All
  • Subscribed
  • Moderated
  • Favorites
  • operating_systems@beehaw.org
  • random
  • meta
  • Macbeth
  • All magazines